List of Projects



Projects Abroad

The Project of Ethanol Plant with Capacity of 30000l per Day, 2015

Customer
from Central Africa

The project is planned to be implemented on two sites:

  • Site No1 – main production – ethanol plant;
  • Site No2 – filtration fields, where the main production waste will be disposed.

Energy and Technology Audit of the Bioethanol Plant, 2014

Customer
UAB "KURANA", Pasvalis, Lithuania

Provision of engineering services on performing energy and technology audit has been carried out by the following stages:
1st stage – acquaintance with the enterprise and performing its investigation. The engineering services have been performed at the place of location of UAB "KURANA" in the territory of Lithuania;
2nd stage – development of the report on performing energy and technology audit, presentation of the preliminary version of the report;
3rd stage – correction of the preliminary version of the report based on the results of its presentation to the personnel of UAB "KURANA".
DDHA method (Danish District Heating Association method) has been partially applied while providing the engineering services on performing energy and technology audit. We widely use this method while providing similar services in Ukraine.

Energy and technology audit allowed to form two main groups of the measures:

  • Measures for increasing ethanol yield per 1 tonne of relative starch taken to processing;
  • Measures for increasing enterprise efficiency.

Revamping of Process Sections of Distillation and Rectification, 2012

Customer
АО "BIOFUTURE", Silute, Lithuania

  • Project No1. Creating production capacity of deep processing of distillery dregs. The project target was to enlarge the end product range by processing distillery dregs into a completely new for Lithuania product which is protein-vitamin concentrate (PVC). PVC is used as an enricher of dry combined fees increasing its feed value. The ecological problem is parallel solved - 100% recovery of distillery dreg is reached;
  • Project No2. Revamping of process sections of distillation and rectification. The project target was to enlarge the end product range by parallel output of rectified ethyl alcohol, the qualitative characteristics of which conform to the requirements of alcohol beverage production.

More >>


Projects in Ukraine

"Marylivka" Project, 2002… 2010

  • Energy and technology audit of production and technologies;
  • Development and introduction of the circulation process water supply system;
  • Development and introduction of low-temperature hydrolysis of mash;
  • Revamping of the distillation and rectification unit applying new types of heat and mass exchange equipment;
  • Development and introduction of APCS (automatic process control system) applying original software;

"Nemiroff" Project, 2004… 2007

  • Energy and technology audit of production and technologies;
  • Designing of circulation process supply system;
  • Development and introduction of low-temperature hydrolysis of mash;
  • Development and implementation of recovery schemes of using secondary energy resources;
  • Development and introduction of APCS (automatic process control system) applying original software.

"Lopatyn" Project, 2006…2009

  • Development and implementation of the technology of low-temperature hydrolysis of mash.
  • Revamping of distillation and rectifiction unit.
  • Development and introduction of APCS (automatic process control system) applaying original software.

"ORGANIKA" Project, 2005…2011

  • Development and introduction of production of DDGS and distillery drag;
  • Development, laboratory testing of filtration technologies in production of ethanol, bioethanol, and DDGS from distillery dregs;
  • Construction of laboratory ultrafiltration unit;
  • Technology adjustment of the laboratory unit;
  • Construction and designing of a pilot-industrial ultrafiltration unit;
  • Installation, start-up and operation of the pilot-industrial unit;
  • Development and indroductionof the scheme of complex grain processing;
  • Development and introduction of APCS (automatic process control system) applying original software.